A workshop that
finally fits the work.
Klovo cabinet sets give the garage workshop what it actually needs: tall storage for the supply pile, drawer banks for hand tools, a worktop for the bench, overhead for the bin set you only touch twice a year — all furniture-grade, all locking by hand. From flat to built in under 3 minutes.
Three benches,
one shared system.
Pick by wall width. Klovo connectors mean you can start with the 6 ft Craft Bench and expand to a full 10 ft Pro Workshop later — same connector, no rework.
8 ft. Workshop / Tool Bench / Maker Wall Set
Klovo's 8-foot workshop set — 6 modular pieces that turn your garage into a workshop in under 50 minutes. No contractor, no Allen keys.
10 ft. Pro Workshop / Maker Hero / Tool Shop Set
Klovo's 10-foot pro workshop set — 8 modular pieces that turn your garage into a pro workshop in under 75 minutes. No contractor, no Allen keys.
6 ft. Craft Bench / Maker Station / Garage Workbench Set
Klovo's 6-foot craft bench set — 4 modular pieces that turn your garage into a craft bench in under 25 minutes. No contractor, no Allen keys.
Industrial-grade panels.
Furniture-grade finish.
- ✓ 500 lbs per cabinet, 99 lbs per drawer. Pile tools high. Stack the supplies bin. Drop the case of motor oil on the floor of the locker. Every cabinet handles real workshop loads.
- ✓ Full-extension ball-bearing drawer slides. Premium DTC SUPER-RAIL slides — the kind that pulls a deep drawer all the way out so the tool at the back is reachable. Soft-close, push-to-open. Limited lifetime warranty from DTC.
- ✓ Moisture-resistant TFL, sealed edges. Garage humidity, basement moisture, the bottle of WD-40 that tipped on the worktop — none of it gets through the laminate. 1mm PVC edge banding seals every exposed edge.
- ✓ Tool-free Klovo connectors. About 2–3 minutes per cabinet. No cam locks, no Allen wrenches, no fighting with proprietary hardware. Your time goes into the workshop, not the assembly.
- ✓ Lockable drawers and doors (optional). Standard locking hardware fits both the door and drawer footprint. Useful for kids in the garage, shared shops, or storing power tools you'd rather not have wander.
- ✓ 100% Made in USA. Built in America by Door Kraft, a 20-year cabinet manufacturer. Domestic engineered wood, domestic TFL finish, domestic edge banding — same supply used in premium kitchen cabinetry.
Where every
tool actually lives.
The workshop works when each category has a defined home — and the home suits the use frequency. Here's the layout that works.
| Tool category | Where | Why |
|---|---|---|
| Hand tools (screwdrivers, pliers, wrenches) | Top drawer of base | 99 lb full-extension drawer; one pull and you see all of it. |
| Power tools (drill, driver, sander, multi-tool) | Middle drawer of base | Cushioned drawer liner protects the tools and the drawer face. |
| Sockets, ratchets, drill index | Drawer organizer trays | Pre-drilled organizer trays drop into Klovo drawers. |
| Saws, large angle grinders, bench tools | Tall locker, base shelf | 500 lb capacity; stays vertical, takes the full footprint. |
| Hardware (screws, nails, fasteners) | Wall cabinet (overhead) | Eye-level, sealed against humidity, parts bins fit. |
| Paint, finishes, solvents | Tall locker upper shelf | Out of toddler reach; sealed against vapor; lockable if needed. |
| Wood scrap, project bins | Tall locker bottom | 500 lb floor; door hides the inevitable mess. |
| Daily-use tools (hammer, tape, square) | Pegboard above worktop | Visible, grabable; pairs with Klovo wall cabinet line. |
| Worktop (clamping, glue-ups, layout) | Worktop, intentional surface | Sacrificial mat for hammer work; TFL handles the rest. |
Workshop
questions, answered.
What size cabinet set should I get for a garage workshop?
Three Klovo sets fit most garage workshops. The 8 ft Workshop is the everyman setup — six pieces with tall storage, a tool-bench worktop, and overhead. The 10 ft Pro Workshop is the maker-hero 8-piece for serious hobbyists, with more drawer storage and a longer bench. The 6 ft Craft Bench is the smaller maker station — perfect when you share the garage with the car or run a focused single-craft setup like jewelry, leatherwork, or fly-tying.
How much weight can a Klovo cabinet hold for tools and gear?
Every Klovo cabinet is rated to 500 lbs. Drawers are rated to 99 lbs each. That handles a full toolbox of hand tools, a battery-tool collection, sockets, drill index, plus the supplies pile — without bowed shelves or sagging drawer fronts a year in.
Will the worktop hold up to clamping, glue-ups, and the occasional hammer slip?
The Klovo worktop is engineered wood with a Thermally Fused Laminate (TFL) finish — scratch-resistant, sealed against moisture with 1mm PVC edge banding. It handles glue-ups, paint splatter, and most hand-tool work cleanly. For heavy hammer work or welding, lay down a sacrificial mat or self-healing cutting mat — same as you would on any furniture-grade workbench.
Are the drawers lockable?
Yes — locking hardware can be added to the doors and drawers. The push-to-open mechanism stays compatible. Useful for shared garages, families with kids, or workshops storing power tools that you want to keep secure.
How does Klovo compare to a steel garage cabinet brand for a workshop?
Steel cabinets (Gladiator, Husky, NewAge) are rated highly for garage workshops, but Klovo competes on three vectors: aesthetics (TFL panels read as furniture, not industrial), assembly speed (about 2–3 minutes per cabinet vs. 30+ minutes for steel cam-lock cabinets), and the connector system (Klovo connectors disassemble cleanly when you move). Steel still wins for sheer impact resistance — if your workshop sees regular hammer hits or welding sparks, steel is the call. For everything else, Klovo is the warmer, faster-to-build option.
Can I add pegboard or wall-mount tool tracks alongside Klovo?
Yes. Klovo cabinets work alongside any pegboard, French cleat, or slatwall system mounted to the wall above the upper cabinet line. The Klovo wall ends at 84 inches; standard 8-foot ceilings give you ~12 inches of pegboard space above for tools you grab daily. The 10 ft Pro Workshop pairs especially well with a 24-inch-tall pegboard run above the worktop.